Boards & Bots
Menu
Home
Sign inSubmit a link

9 tags ยท 9 with entries

Bench gear

Scopes, analyzers, probes, supplies and cameras that agents read or drive. Pick a piece of gear to see who has put an agent on it.

  1. Debug probe23 entriesJ-Link, ST-Link, CMSIS-DAP and similar probes. Through OpenOCD, probe-rs or pyOCD, an agent flashes firmware, sets breakpoints and reads memory with them.
  2. Camera & vision rig20 entriesWebcams and machine-vision rigs that an agent uses to look at the hardware: reading a display, checking an LED or watching a robot move.
  3. Oscilloscope16 entriesScopes an agent can read or control over USB or the network, from Rigol and Siglent to Keysight and Tektronix, to check signals on a board.
  4. Power supply & power control16 entriesBench supplies, electronic loads and smart plugs that an agent uses to power-cycle a board or measure what it draws.
  5. Logic analyzer11 entriesSaleae, sigrok-compatible and other logic analyzers that an agent uses to capture and decode digital buses such as SPI, I2C and UART.
  6. Signal generator8 entriesFunction generators, arbitrary waveform generators and combo devices such as the Analog Discovery, driven by an agent to stimulate a circuit.
  7. Multimeter5 entriesDigital multimeters with a computer interface, from which an agent reads voltage, current and resistance directly.
  8. Power profiler3 entriesCurrent and energy profilers such as Nordic's Power Profiler Kit II, Joulescope and Otii. An agent uses them to measure what firmware draws in each state and to check a low-power change.
  9. Software-defined radio3 entriesSoftware-defined radios such as HackRF and RTL-SDR, used by agents to capture, decode or test radio signals.