Repos, MCP servers, CLIs and libraries that connect an AI agent to boards and bench gear.
Most GitHub stars first. Tools without repo facts come after, newest first.
Filtered by
4 mo ago
oscilloscope-mcp connects Claude Code, Cursor or a custom agent to a Rigol DS1000Z oscilloscope over LAN SCPI. A profile lists the series' 15 trigger types and about 95 parameters, and the server checks requests against it before sending. A compare tool diffs captured edges against an RTL simulation. The README shows an agent-configured four-channel capture on a DS1104Z.
34 d ago
efinity-mcp drives a local install of Efinix's Efinity FPGA toolchain from an MCP client such as Claude. Its tools create projects and compile them, set up I/O and PLLs, read timing and utilization reports, and program boards over JTAG or SPI flash. The README says an assistant-built LED demo ran on a Ti375 dev kit. Only Windows is tested.
3 mo ago
neorv32-mcp offers 15 tools in two MCP servers for a NeoRV32 RISC-V core on an Alchitry Pt V2 FPGA board. UART tools load an ELF into RAM or flash it to SPI; OpenOCD tools halt the CPU and read memory. Flashing is refused unless the same ELF ran from RAM first, checked by SHA-256. The README shows no test logs.
5 mo ago
Active Firmware Tools connected Claude Code to its Active-Pro logic analyzer and firmware debugger through an MCP server over TCP. In the two-minute video the agent triggers a capture on a custom board with three FPGAs running RISC-V soft cores. It reads firmware trace output alongside RGMII, USB enumeration and SCSI traffic and checks it for errors.
