Boards, robots and rigs that people built or fixed with an agent.
Newest first, as we log them.
Filtered by
34 d ago
adsb-radar decodes ADS-B on a Raspberry Pi Zero 2 W with an RTL-SDR. An n8n workflow on a Raspberry Pi 5 picks the plane visible from a window and looks up its route, and an ESP32-S3-BOX-3 screen shows it. The owner says all the code came from Claude Code sessions. The README reports 4,623 sightings in 12 days.
2 mo ago
XDA's Anurag Singh used Claude Code to plan an ESPHome multi-sensor on an ESP32-WROOM-32 DevKit. It put an LD2410C mmWave sensor on UART pins and a BME280 and BH1750 on shared I2C pins, then wrote, validated and compiled the YAML. He says the device then reported to Home Assistant. The article shows screenshots, not the build.
4 mo ago
Dimitri Sudomoin spent an afternoon with Claude Code finding the handshake a FlexiSpot E7 Pro Plus controller expects from its keypad. A $7 ESP32 now imitates the keypad so Home Assistant can move the desk. Claude Code also mapped a Plaud Note recorder's Bluetooth protocol over about 5 days. He writes that the models are about 90% accurate.
