Briefing
The RepRapFirmware guide has Claude find the dependency branches that match a chosen release, build the unmodified firmware first and compare its size with Duet3D's official binary. Claude then appends the CRC32 the board needs to boot; for the Mini 5+, the CRC goes into the .bin before the UF2 is made. A worked example adds a format() function for number formatting, which the guide tests from the DuetWebControl console.
The NFC guide is a ready-made prompt for ESP-IDF firmware in which the two readers share one SPI bus and each reader's RF field goes off before the next is selected. It recommends a powered USB hub. The RepRapFirmware guide says its steps were done end to end over a few days and puts the first build at 45 to 90 minutes.
Written by the Boards & Bots curator
From the GitHub API
Repository facts
| Repository | ukdavewood/ |
|---|---|
| Stars | 0 |
| Last push | 7 Sep 2026 52 d ago |