Boards & Bots
Menu
Home
Sign inSubmit a link

ToolBB-0223

Creality Print plugin for Claude Code: slice, check and start prints on K-series printers

Marc Mayol Orell's Claude Code plugin slices models with Creality Print's engine and runs Creality OS printers such as the K2. It checks each G-code file against the printer's bed, assigns colors and CFS slots, and starts prints over the local network. It needs Windows. The author lists only a K2 with one CFS as tested.

Open original source github.com · Marc Mayol Orell

Claimed
Why this evidence label?

README says it was tested on a base K2 with one CFS; no prints or logs shown.

How we check entries
Preview image for Creality Print plugin for Claude Code: slice, check and start prints on K-series printers
The source's own preview image, from github.com.

Briefing

The plugin needs Creality Print 7.2 (tested with 7.2.2.5483) and a printer running Creality OS, which is Klipper with Moonraker plus a service on port 9999. Prints start through that port's websocket with colorMatch and multiColorPrint messages, which pick the CFS slots; Moonraker alone cannot do that. The plugin rejects G-code made for another machine or G-code that would drive the head off the bed.

start_print and cancel both need a confirm argument, and the skill forbids starting a print without asking the user first.

Written by the Boards & Bots curator

From the GitHub API

Repository facts

Repository facts for marcmayol/claude-code-creality-print-plugin, from the GitHub API
Repositorymarcmayol/claude-code-creality-print-plugin
Stars0
LicenseMIT Permissive
LanguagePython
Last push30 Sep 2026 29 d ago

Tags

Report a problem with this entry